Série AP - Specs
Balances analytiques
AP225W
Capacity |
220g |
---|---|
Minimum display |
0.01 mg |
Calibration Weight |
Built-in *1 |
External Calibration Weight Range for Span Calibration |
95 to 220.00090 g |
Repeatability (Standard deviation) |
0.015mg |
Minimum Weight *2 |
20 mg |
Linearity *2 |
±0.1 mg |
Response Time for race Measurements *3 |
2 sec. |
Response Time *4 |
8 sec. |
USB Host (Type A) |
Included |
USB Device (Type B) |
Included |
Recipe Compounding |
Included |
HPLC Buffer Solution Preparation |
Included |
mol Conversion Function |
Included |
Sample (Concentration) Preparation |
Included |
Inspection Support Function |
Included |
Clock-CAL |
Included |
Ionizer |
Optional |
Operating Temperature/Humidity Range |
5 to 40°C 20 to 85% *5 |
Sensitivity Stability Against Temperature Range |
±2 ppm/°C (10 to 30°C) |
Pan Size |
ø91 mm |
Body Dimensions |
Approx. 213(W) x 411(D) x 345(H)mm |
Weight |
Approx. 7.9 kg |
Display |
OEL display (dot matrix) |
Input/Output Terminal |
RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer |
*1 Minimum display 0.01mg models provide two internal weights as standard.
*2 Be compliant with USP Chapter 41. This is the tested value by the weight of the balance’s capacity of 5% (or 5 grams’ weight). In the case of the AP225W, the results are for tests carried out with the optional internal windbreak plate applied. The minimum weight value is affected by the installation environment, so it is necessary to measure it in the actual environment of use.
*3 The response time for displaying 90% of the added sample amount value in trace measurements (from 1mg)
*4 The response time value is typical.
*5 Non-condensing.
AP125WD
Capacity |
120 g / 52g |
---|---|
Minimum display |
0.01 mg / 0.1 mg |
Calibration Weight |
Built-in *1 |
External Calibration Weight Range for Span Calibration |
95 to 120.0090 g |
Repeatability (Standard deviation) |
0.1 mg / 0.02 mg |
Minimum Weight *2 |
30 mg |
Linearity *2 |
±0.2 mg /±0.05 mg |
Response Time for race Measurements *3 |
2 sec. |
Response Time *4 |
2 sec. / 8 sec |
USB Host (Type A) |
Included |
USB Device (Type B) |
Included |
Recipe Compounding |
Included |
HPLC Buffer Solution Preparation |
Included |
mol Conversion Function |
Included |
Sample (Concentration) Preparation |
Included |
Inspection Support Function |
Included |
Clock-CAL |
Included |
Ionizer |
Optional |
Operating Temperature/Humidity Range |
5 to 40°C 20 to 85% *5 |
Sensitivity Stability Against Temperature Range |
±2 ppm/°C (10 to 30°C) |
Pan Size |
ø91 mm |
Body Dimensions |
Approx. 213(W) x 411(D) x 345(H)mm |
Weight |
Approx. 7.9 kg |
Display |
OEL display (dot matrix) |
Input/Output Terminal |
RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer |
AP225WD
Capacity |
220 g / 102g |
---|---|
Minimum display |
0.01 mg / 0.1 mg |
Calibration Weight |
Built-in *1 |
External Calibration Weight Range for Span Calibration |
95 to 220.009 g |
Repeatability (Standard deviation) |
0.1 mg / 0.05 mg |
Minimum Weight *2 |
30 mg |
Linearity *2 |
±0.2 mg /±0.1 mg |
Response Time for race Measurements *3 |
2 sec. |
Response Time *4 |
2 sec. / 8 sec |
USB Host (Type A) |
Included |
USB Device (Type B) |
Included |
Recipe Compounding |
Included |
HPLC Buffer Solution Preparation |
Included |
mol Conversion Function |
Included |
Sample (Concentration) Preparation |
Included |
Inspection Support Function |
Included |
Clock-CAL |
Included |
Ionizer |
Optional |
Operating Temperature/Humidity Range |
5 to 40°C 20 to 85% *5 |
Sensitivity Stability Against Temperature Range |
±2 ppm/°C (10 to 30°C) |
Pan Size |
ø91 mm |
Body Dimensions |
Approx. 213(W) x 411(D) x 345(H)mm |
Weight |
Approx. 7.9 kg |
Display |
OEL display (dot matrix) |
Input/Output Terminal |
RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer |
AP124W
Capacity |
120 g |
---|---|
Minimum display |
0.1 mg |
Calibration Weight |
Built-in *1 |
External Calibration Weight Range for Span Calibration |
45 to 120.009 g |
Repeatability (Standard deviation) |
0.1 mg |
Minimum Weight *2 |
200 mg |
Linearity *2 |
±0.2 mg |
Response Time for race Measurements *3 |
2 sec. |
Response Time *4 |
2 sec. |
USB Host (Type A) |
Included |
USB Device (Type B) |
Included |
Recipe Compounding |
Included |
HPLC Buffer Solution Preparation |
Included |
mol Conversion Function |
Included |
Sample (Concentration) Preparation |
Included |
Inspection Support Function |
Included |
Clock-CAL |
Included |
Ionizer |
Optional |
Operating Temperature/Humidity Range |
5 to 40°C 20 to 85% *5 |
Sensitivity Stability Against Temperature Range |
±2 ppm/°C (10 to 30°C) |
Pan Size |
ø91 mm |
Body Dimensions |
Approx. 213(W) x 367(D) x 345(H)mm |
Weight |
Approx. 7.9 kg |
Display |
OEL display (dot matrix) |
Input/Output Terminal |
RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer |
AP224W
Capacity |
220 g |
---|---|
Minimum display |
0.1 mg |
Calibration Weight |
Built-in *1 |
External Calibration Weight Range for Span Calibration |
95 to 220.009 g |
Repeatability (Standard deviation) |
0.1 mg |
Minimum Weight *2 |
200 mg |
Linearity *2 |
±0.2 mg |
Response Time for race Measurements *3 |
2 sec. |
Response Time *4 |
2 sec. |
USB Host (Type A) |
Included |
USB Device (Type B) |
Included |
Recipe Compounding |
Included |
HPLC Buffer Solution Preparation |
Included |
mol Conversion Function |
Included |
Sample (Concentration) Preparation |
Included |
Inspection Support Function |
Included |
Clock-CAL |
Included |
Ionizer |
Optional |
Operating Temperature/Humidity Range |
5 to 40°C 20 to 85% *5 |
Sensitivity Stability Against Temperature Range |
±2 ppm/°C (10 to 30°C) |
Pan Size |
ø91 mm |
Body Dimensions |
Approx. 213(W) x 367(D) x 345(H)mm |
Weight |
Approx. 7.9 kg |
Display |
OEL display (dot matrix) |
Input/Output Terminal |
RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer |
AP324W
Capacity |
320 g |
---|---|
Minimum display |
0.1 mg |
Calibration Weight |
Built-in *1 |
External Calibration Weight Range for Span Calibration |
95 to 320.009 g |
Repeatability (Standard deviation) |
0.15 mg |
Minimum Weight *2 |
200 mg |
Linearity *2 |
±0.3 mg |
Response Time for race Measurements *3 |
2 sec. |
Response Time *4 |
2 sec. |
USB Host (Type A) |
Included |
USB Device (Type B) |
Included |
Recipe Compounding |
Included |
HPLC Buffer Solution Preparation |
Included |
mol Conversion Function |
Included |
Sample (Concentration) Preparation |
Included |
Inspection Support Function |
Included |
Clock-CAL |
Included |
Ionizer |
Optional |
Operating Temperature/Humidity Range |
5 to 40°C 20 to 85% *5 |
Sensitivity Stability Against Temperature Range |
±2 ppm/°C (10 to 30°C) |
Pan Size |
ø91 mm |
Body Dimensions |
Approx. 213(W) x 367(D) x 345(H)mm |
Weight |
Approx. 7.9 kg |
Display |
OEL display (dot matrix) |
Input/Output Terminal |
RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer |
AP124X
Capacity |
120 g |
---|---|
Minimum display |
0.1 mg |
Calibration Weight |
Built-in |
External Calibration Weight Range for Span Calibration |
45 to 120.009 g |
Repeatability (Standard deviation) |
0.1 mg |
Minimum Weight *2 |
200 mg |
Linearity *2 |
±0.2 mg |
Response Time for race Measurements *3 |
2 sec. |
Response Time *4 |
2 sec. |
USB Host (Type A) |
Not Included |
USB Device (Type B) |
Included |
Recipe Compounding |
Not Included |
HPLC Buffer Solution Preparation |
Not Included |
mol Conversion Function |
Included |
Sample (Concentration) Preparation |
Not Included |
Inspection Support Function |
Included |
Clock-CAL |
Included |
Ionizer |
Optional |
Operating Temperature/Humidity Range |
5 to 40°C 20 to 85% *5 |
Sensitivity Stability Against Temperature Range |
±2 ppm/°C (10 to 30°C) |
Pan Size |
ø91 mm |
Body Dimensions |
Approx. 213(W) x 367(D) x 345(H)mm |
Weight |
Approx. 7.0 kg |
Display |
OEL display (dot matrix) |
Input/Output Terminal |
RS-232C (D-sub9P plug) |
AP224X
Capacity |
220 g |
---|---|
Minimum display |
0.1 mg |
Calibration Weight |
Built-in |
External Calibration Weight Range for Span Calibration |
95 to 220.009 g |
Repeatability (Standard deviation) |
0.1 mg |
Minimum Weight *2 |
200 mg |
Linearity *2 |
±0.2 mg |
Response Time for race Measurements *3 |
2 sec. |
Response Time *4 |
2 sec. |
USB Host (Type A) |
Not Included |
USB Device (Type B) |
Included |
Recipe Compounding |
Not Included |
HPLC Buffer Solution Preparation |
Not Included |
mol Conversion Function |
Included |
Sample (Concentration) Preparation |
Not Included |
Inspection Support Function |
Included |
Clock-CAL |
Included |
Ionizer |
Optional |
Operating Temperature/Humidity Range |
5 to 40°C 20 to 85% *5 |
Sensitivity Stability Against Temperature Range |
±2 ppm/°C (10 to 30°C) |
Pan Size |
ø91 mm |
Body Dimensions |
Approx. 213(W) x 367(D) x 345(H)mm |
Weight |
Approx. 7.0 kg |
Display |
OEL display (dot matrix) |
Input/Output Terminal |
RS-232C (D-sub9P plug) |
AP324X
Capacity |
320 g |
---|---|
Minimum display |
0.1 mg |
Calibration Weight |
Built-in |
External Calibration Weight Range for Span Calibration |
95 to 320.009 g |
Repeatability (Standard deviation) |
0.15 mg |
Minimum Weight *2 |
200 mg |
Linearity *2 |
±0.3 mg |
Response Time for race Measurements *3 |
2 sec. |
Response Time *4 |
2 sec. |
USB Host (Type A) |
Not Included |
USB Device (Type B) |
Included |
Recipe Compounding |
Not Included |
HPLC Buffer Solution Preparation |
Not Included |
mol Conversion Function |
Included |
Sample (Concentration) Preparation |
Not Included |
Inspection Support Function |
Included |
Clock-CAL |
Included |
Ionizer |
Optional |
Operating Temperature/Humidity Range |
5 to 40°C 20 to 85% *5 |
Sensitivity Stability Against Temperature Range |
±2 ppm/°C (10 to 30°C) |
Pan Size |
ø91 mm |
Body Dimensions |
Approx. 213(W) x 367(D) x 345(H)mm |
Weight |
Approx. 7.0 kg |
Display |
OEL display (dot matrix) |
Input/Output Terminal |
RS-232C (D-sub9P plug) |
AP124Y
Capacity |
120 g |
---|---|
Minimum display |
0.1 mg |
Calibration Weight |
No |
External Calibration Weight Range for Span Calibration |
45 to 120.009 g |
Repeatability (Standard deviation) |
0.1 mg |
Minimum Weight *2 |
200 mg |
Linearity *2 |
±0.2 mg |
Response Time for race Measurements *3 |
2 sec. |
Response Time *4 |
2 sec. |
USB Host (Type A) |
Not Included |
USB Device (Type B) |
Included |
Recipe Compounding |
Not Included |
HPLC Buffer Solution Preparation |
Not Included |
mol Conversion Function |
Not Included |
Sample (Concentration) Preparation |
Not Included |
Inspection Support Function |
Not Included |
Clock-CAL |
Not Included |
Ionizer |
Not Included |
Operating Temperature/Humidity Range |
5 to 40°C 20 to 85% *5 |
Sensitivity Stability Against Temperature Range |
±2 ppm/°C (10 to 30°C) |
Pan Size |
ø91 mm |
Body Dimensions |
Approx. 213(W) x 367(D) x 345(H)mm |
Weight |
Approx. 6.5 kg |
Display |
OEL display (dot matrix) |
Input/Output Terminal |
RS-232C (D-sub9P plug) |
AP224Y
Capacity |
220 g |
---|---|
Minimum display |
0.1 mg |
Calibration Weight |
No |
External Calibration Weight Range for Span Calibration |
95 to 220.009 g |
Repeatability (Standard deviation) |
0.1 mg |
Minimum Weight *2 |
200 mg |
Linearity *2 |
±0.2 mg |
Response Time for race Measurements *3 |
2 sec. |
Response Time *4 |
2 sec. |
USB Host (Type A) |
Not Included |
USB Device (Type B) |
Included |
Recipe Compounding |
Not Included |
HPLC Buffer Solution Preparation |
Not Included |
mol Conversion Function |
Not Included |
Sample (Concentration) Preparation |
Not Included |
Inspection Support Function |
Not Included |
Clock-CAL |
Not Included |
Ionizer |
Not Included |
Operating Temperature/Humidity Range |
5 to 40°C 20 to 85% *5 |
Sensitivity Stability Against Temperature Range |
±2 ppm/°C (10 to 30°C) |
Pan Size |
ø91 mm |
Body Dimensions |
Approx. 213(W) x 367(D) x 345(H)mm |
Weight |
Approx. 6.5 kg |
Display |
OEL display (dot matrix) |
Input/Output Terminal |
RS-232C (D-sub9P plug) |
AP324Y
Capacity |
320 g |
---|---|
Minimum display |
0.1 mg |
Calibration Weight |
No |
External Calibration Weight Range for Span Calibration |
95 to 320.009 g |
Repeatability (Standard deviation) |
0.15 mg |
Minimum Weight *2 |
200 mg |
Linearity *2 |
±0.3 mg |
Response Time for race Measurements *3 |
2 sec. |
Response Time *4 |
2 sec. |
USB Host (Type A) |
Not Included |
USB Device (Type B) |
Included |
Recipe Compounding |
Not Included |
HPLC Buffer Solution Preparation |
Not Included |
mol Conversion Function |
Not Included |
Sample (Concentration) Preparation |
Not Included |
Inspection Support Function |
Not Included |
Clock-CAL |
Not Included |
Ionizer |
Not Included |
Operating Temperature/Humidity Range |
5 to 40°C 20 to 85% *5 |
Sensitivity Stability Against Temperature Range |
±2 ppm/°C (10 to 30°C) |
Pan Size |
ø91 mm |
Body Dimensions |
Approx. 213(W) x 367(D) x 345(H)mm |
Weight |
Approx. 6.5 kg |
Display |
OEL display (dot matrix) |
Input/Output Terminal |
RS-232C (D-sub9P plug) |
AP135W
Capacity |
135 g |
---|---|
Minimum display |
0.01 mg |
Calibration Weight |
Built-in *1 |
External Calibration Weight Range for Span Calibration |
45 to 135.009 g |
Repeatability (Standard deviation) |
0.05 mg |
Minimum Weight *2 |
30 mg |
Linearity *2 |
±0.1 mg |
Response Time for race Measurements *3 |
2 sec. |
Response Time *4 |
8 sec. |
USB Host (Type A) |
Included |
USB Device (Type B) |
Included |
Recipe Compounding |
Included |
HPLC Buffer Solution Preparation |
Included |
mol Conversion Function |
Included |
Sample (Concentration) Preparation |
Included |
Inspection Support Function |
Included |
Clock-CAL |
Included |
Ionizer |
Optional |
Operating Temperature/Humidity Range |
5 to 40°C 20 to 85% *5 |
Sensitivity Stability Against Temperature Range |
±2 ppm/°C (10 to 30°C) |
Pan Size |
ø91 mm |
Body Dimensions |
Approx. 212(W) x 411(D) x 345(H)mm |
Weight |
Approx. 7.9 kg |
Display |
OEL display (dot matrix) |
Input/Output Terminal |
RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer |
AP225W-AD
Capacity |
220g |
---|---|
Minimum display |
0.01 mg |
Calibration Weight |
Built-in *1 |
External Calibration Weight Range for Span Calibration |
95 to 220.00090 g |
Repeatability (Standard deviation) |
0.015mg |
Minimum Weight *2 |
20 mg |
Linearity *2 |
±0.1 mg |
Response Time for race Measurements *3 |
2 sec. |
Response Time *4 |
8 sec. |
USB Host (Type A) |
Included |
USB Device (Type B) |
Included |
Recipe Compounding |
Included |
HPLC Buffer Solution Preparation |
Included |
mol Conversion Function |
Included |
Sample (Concentration) Preparation |
Included |
Inspection Support Function |
Included |
Clock-CAL |
Included |
Automatic Doors |
Included |
Touchless Sensors |
Included |
Adjustable Internal Windbreak Plate |
Included |
Ionizer |
Included |
Operating Temperature/Humidity Range |
5 to 40°C 20 to 85% *5 |
Sensitivity Stability Against Temperature Range |
±2 ppm/°C (10 to 30°C) |
Pan Size |
ø91 mm |
Body Dimensions |
Approx. 215(W) x 411(D) x 346(H)mm |
Weight |
Approx. 7.9 kg |
Display |
OEL display (dot matrix) |
Input/Output Terminal |
RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer |
*1 Minimum display 0.01mg models provide two internal weights as standard.
*2 Be compliant with USP Chapter 41. This is the tested value by the weight of the balance’s capacity of 5% (or 5 grams’ weight). In the case of the AP225W, the results are for tests carried out with the optional internal windbreak plate applied. The minimum weight value is affected by the installation environment, so it is necessary to measure it in the actual environment of use.
*3 The response time for displaying 90% of the added sample amount value in trace measurements (from 1mg)
*4 The response time value is typical.
*5 Non-condensing.
AP135W-AD
Capacity |
135 g |
---|---|
Minimum display |
0.01 mg |
Calibration Weight |
Built-in *1 |
External Calibration Weight Range for Span Calibration |
45 to 135.009 g |
Repeatability (Standard deviation) |
0.05 mg |
Minimum Weight *2 |
30 mg |
Linearity *2 |
±0.1 mg |
Response Time for race Measurements *3 |
2 sec. |
Response Time *4 |
8 sec. |
USB Host (Type A) |
Included |
USB Device (Type B) |
Included |
Recipe Compounding |
Included |
HPLC Buffer Solution Preparation |
Included |
mol Conversion Function |
Included |
Sample (Concentration) Preparation |
Included |
Inspection Support Function |
Included |
Clock-CAL |
Included |
Automatic Doors |
Included |
Touchless Sensors |
Included |
Adjustable Internal Windbreak Plate |
Included |
Ionizer |
Included |
Operating Temperature/Humidity Range |
5 to 40°C 20 to 85% *5 |
Sensitivity Stability Against Temperature Range |
±2 ppm/°C (10 to 30°C) |
Pan Size |
ø91 mm |
Body Dimensions |
Approx. 215(W) x 411(D) x 346(H)mm |
Weight |
Approx. 7.9 kg |
Display |
OEL display (dot matrix) |
Input/Output Terminal |
RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer |
AP125WD-AD
Capacity |
120 g / 52g |
---|---|
Minimum display |
0.01 mg / 0.1 mg |
Calibration Weight |
Built-in *1 |
External Calibration Weight Range for Span Calibration |
95 to 120.0090 g |
Repeatability (Standard deviation) |
0.1 mg / 0.02 mg |
Minimum Weight *2 |
30 mg |
Linearity *2 |
±0.2 mg /±0.05 mg |
Response Time for race Measurements *3 |
2 sec. |
Response Time *4 |
2 sec. / 8 sec |
USB Host (Type A) |
Included |
USB Device (Type B) |
Included |
Recipe Compounding |
Included |
HPLC Buffer Solution Preparation |
Included |
mol Conversion Function |
Included |
Sample (Concentration) Preparation |
Included |
Inspection Support Function |
Included |
Clock-CAL |
Included |
Automatic Doors |
Included |
Touchless Sensors |
Included |
Adjustable Internal Windbreak Plate |
Included |
Ionizer |
Included |
Operating Temperature/Humidity Range |
5 to 40°C 20 to 85% *5 |
Sensitivity Stability Against Temperature Range |
±2 ppm/°C (10 to 30°C) |
Pan Size |
ø91 mm |
Body Dimensions |
Approx. 215(W) x 411(D) x 346(H)mm |
Weight |
Approx. 7.9 kg |
Display |
OEL display (dot matrix) |
Input/Output Terminal |
RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer |
AP225WD-AD
Capacity |
220 g / 102g |
---|---|
Minimum display |
0.01 mg / 0.1 mg |
Calibration Weight |
Built-in *1 |
External Calibration Weight Range for Span Calibration |
95 to 220.009 g |
Repeatability (Standard deviation) |
0.1 mg / 0.05 mg |
Minimum Weight *2 |
30 mg |
Linearity *2 |
±0.2 mg /±0.1 mg |
Response Time for race Measurements *3 |
2 sec. |
Response Time *4 |
2 sec. / 8 sec |
USB Host (Type A) |
Included |
USB Device (Type B) |
Included |
Recipe Compounding |
Included |
HPLC Buffer Solution Preparation |
Included |
mol Conversion Function |
Included |
Sample (Concentration) Preparation |
Included |
Inspection Support Function |
Included |
Clock-CAL |
Included |
Automatic Doors |
Included |
Touchless Sensors |
Included |
Adjustable Internal Windbreak Plate |
Included |
Ionizer |
Included |
Operating Temperature/Humidity Range |
5 to 40°C 20 to 85% *5 |
Sensitivity Stability Against Temperature Range |
±2 ppm/°C (10 to 30°C) |
Pan Size |
ø91 mm |
Body Dimensions |
Approx. 215(W) x 411(D) x 346(H)mm |
Weight |
Approx. 7.9 kg |
Display |
OEL display (dot matrix) |
Input/Output Terminal |
RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer |
AP224W-AD
Capacity |
220 g |
---|---|
Minimum display |
0.1 mg |
Calibration Weight |
Built-in *1 |
External Calibration Weight Range for Span Calibration |
95 to 220.009 g |
Repeatability (Standard deviation) |
0.1 mg |
Minimum Weight *2 |
200 mg |
Linearity *2 |
±0.2 mg |
Response Time for race Measurements *3 |
2 sec. |
Response Time *4 |
2 sec. |
USB Host (Type A) |
Included |
USB Device (Type B) |
Included |
Recipe Compounding |
Included |
HPLC Buffer Solution Preparation |
Included |
mol Conversion Function |
Included |
Sample (Concentration) Preparation |
Included |
Inspection Support Function |
Included |
Clock-CAL |
Included |
Automatic Doors |
Included |
Touchless Sensors |
Included |
Adjustable Internal Windbreak Plate |
Not Available |
Ionizer |
Included |
Operating Temperature/Humidity Range |
5 to 40°C 20 to 85% *5 |
Sensitivity Stability Against Temperature Range |
±2 ppm/°C (10 to 30°C) |
Pan Size |
ø91 mm |
Body Dimensions |
Approx. 215(W) x 367(D) x 346(H)mm |
Weight |
Approx. 7.0 kg |
Display |
OEL display (dot matrix) |
Input/Output Terminal |
RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer |
AP324W-AD
Capacity |
320 g |
---|---|
Minimum display |
0.1 mg |
Calibration Weight |
Built-in *1 |
External Calibration Weight Range for Span Calibration |
95 to 320.009 g |
Repeatability (Standard deviation) |
0.15 mg |
Minimum Weight *2 |
200 mg |
Linearity *2 |
±0.3 mg |
Response Time for race Measurements *3 |
2 sec. |
Response Time *4 |
2 sec. |
USB Host (Type A) |
Included |
USB Device (Type B) |
Included |
Recipe Compounding |
Included |
HPLC Buffer Solution Preparation |
Included |
mol Conversion Function |
Included |
Sample (Concentration) Preparation |
Included |
Inspection Support Function |
Included |
Clock-CAL |
Included |
Automatic Doors |
Included |
Touchless Sensors |
Included |
Adjustable Internal Windbreak Plate |
Not Available |
Ionizer |
Included |
Operating Temperature/Humidity Range |
5 to 40°C 20 to 85% *5 |
Sensitivity Stability Against Temperature Range |
±2 ppm/°C (10 to 30°C) |
Pan Size |
ø91 mm |
Body Dimensions |
Approx. 215(W) x 367(D) x 346(H)mm |
Weight |
Approx. 7.0 kg |
Display |
OEL display (dot matrix) |
Input/Output Terminal |
RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer |