Specifications of AG-Xplus table-top type
* LCD touch panel, laptop PC, and table are optional.
* Table used in image is not a Shimadzu product.
(Dimensions given for left, right, and back of main unit are required for maintenance.)
|Model|| Weight |
|Power Requirements Value in ( ) indicates power consumption||Installation Environment|
|AG-10NX to 10kNXplus||153||Single phase 100 to 110/115 to 130/220 to 230/240 V (switching system) 50 to 60 Hz, 1.5 kVA (450 W)|| Temp.: 5 to 40 °C |
Humidity: 20 to 80 % (no condensation)
Voltage fluctuation: ±10 % max.
Vibration: Frequency 10 Hz max., amplitude 5 mm max.
|AG-20/50kNX/50kNXDplus||261||Single phase 200 to 230 V, 50 to 60 Hz, 5 kVA (1.2 kW)|
Table-Top Type AG-Xplus
*1: Crosshead speed precision is calculated using crosshead transfer amount within a specified period of time for
the crosshead speed of 0.5 mm/min to 500 mm/min under normal conditions.
*2: Tensile stroke is the value used when attaching the MWG(non-shift wedge type)grips.
Stroke can be extended.
Values under 5kN are with SCG(screw type flat)grips attached.
*3: JIS B7721, EN 10002-2, ISO 7500-1, and ASTM E4 standards recommend re-verification after installation of
*4: The LCD touch panel(optional)is required for Dataletty(optional).
*5: Dateletty(optional)and TRAPEZIUM X operational software cannot be used together.
Values in this table have been measured based on separately-approved test standards.
This page may contain references to products that are not available in your country.
Please contact us to check the availability of these products in your country.