| Interferometer |
Michelson interferometer (30 degree incident angle) |
| Advanced Dynamic alignment system |
| Sealed and desiccated interferometer with an automatic dryer |
| Beam splitter |
Germanium-coated KBr plate for Middle IR (Standard) |
| Germanium-coated CsI plate for Middle/Far IR (Optional) |
| Silicon-coated CaF2 plate for Near IR (Optional) |
| Light source |
Air Cooled Ceramic for Middle/Far IR with 3 years guarantee (Standard) |
| Tungsten lamp for Near IR (Optional) |
| Detector |
DLATGS detector with Temperature Control for Middle/Far IR (Standard) |
| MCT (Hg-Cd-Te) detector with Liquid Nitrogen Cooling for Middle
IR (Optional) |
| InGaAs detector for Near IR (Optional) |
| Wavenumber range |
7,800 - 350 cm-1 |
| 12,500 - 240 cm-1 (Optional) |
| Resolution |
0.5, 1, 2, 4, 8, 16 cm-1 (Middle/Far IR) |
| 2, 4, 8, 16 cm-1 (Near IR) |
| S/N ratio |
40,000: 1 and higher |
| (Peak-to-peak, 4 cm-1 resolution, approx. 2100 cm-1,
1 minute scan) |
| Operation System |
Microsoft Windows 2000/XP |
| Interface between PC and FTIR |
IEEE 1394 |
| Hardware Monitoring |
Self Diagnostics, Status Monitor |
| Validation Program complies with Japanese Pharmacopoeia/European
Pharmacopoeia/ASTM |
| Data processing |
Addition, Multiplication, Abs to %T conversion, Normalization,
Baseline correction, Log conversion, Smoothing, Derivative, ATR correction, Kubelka-Munk
conversion, Kramers-Kronig analysis, Wavenumber/wavelength conversion, Peak detection,
Peak area calculation, Film thickness calculation |
| Quantitative processing |
Multipoint calibration curve with peak height/area/ratio, Multilinear
regression (MLR method) |
| Spectrum search |
Search parameters, Search, Library creation |
| Print processing |
Report Generator |
| Optional Software |
Macro Programming, PLS Quantitation, Curve Fitting, 3 Dimensional
Presentation with Mapping |
| Audit Trail |
Container function with stored interferogram/background spectrum,
operation history |
| Password Protection |
| Log recording |
| FDA CFR Part 11 compliance, Electric Signature |
| Accessory Detection |
Automatically recognize Installed accessory. Then sets up scan
parameters and runs macro program. |
| ATR Accessories; ATR-8000A, ATR-8200HA, MIRacle A, DuraSamplIR
A, etc. |
| Diffuse Reflectance Accessories; DRS-8000A, etc. |
| Reflectance Accessories; SRM-8000A, RAS-8000A, etc. |
| Dimensions |
600 (W) x 680 (L) x 290 (H) mm |
| Weight |
54 Kg |
Home > Products > Spectroscopy > FTIR > IR Prestige-21 > Specifications
